What to Do If Your Hot Water System Unexpectedly Quits: Essential Steps
What to Do If Your Hot Water System Unexpectedly Quits: Essential Steps
Blog Article
Each person has got their personal way of thinking when it comes to What Would Cause My Electric Water Heater to Stop Working?.
Many modern houses use an electric water heater for their heater, because of its comfort as well as simplicity of use. Nevertheless, just like any other electrical appliances, troubles may emerge with its use, suddenly. It can be actually discouraging to wake up to a cold shower as opposed to a warm one or having your bathroom with water that isn't warm sufficient or even as well warm. Whatever the case may be, hot water heater issues can be rather nerve-racking. Luckily, we have actually made a checklist of possible solutions to your water heater concerns. There are a number of variables that could create a lot of these problems, it could be a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you turn off the primary power supply for security. Whatever the issue is, getting it repaired need to not position excessive of an issue if you follow these steps:
Call A Professional:
If after replacing all malfunctioning components and resetting your temperature, the hot water heater still isn't functioning, you may need to call a professional plumber for an expert viewpoint. The issue with your heating system could be that the cold and hot faucets have been switched over or it might be undersized for the amount of hot water required in your home. Whatever the situation might be, an expert plumber would certainly help address the trouble.
Examine Your Power Supply:
As standard as this may seem, it is really necessary. Without appropriate power, your hot water heater will certainly not work. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power trouble. Check if the fuse is blown out or the breaker stumbled. If the circuit breaker is the problem, merely turn it on and off once more. Replace any type of busted or damaged fuse. Test the home appliance with power after these adjustments to see if it's currently working.
Examine Your Thermostat:
If your water heater still isn't working or the water coming out isn't warm sufficient, you might require to check the temperature settings on your top thermostat. Make certain the circuit breaker is switched off before doing anything. Open the gain access to panel and also press the red switch for temperature level reset over the thermostat. This should aid heat the water. Turn the circuit breaker back on as well as inspect if the trouble has actually been fixed.
Inspect the Burner in the Hot Water Heater:
If it's not a power issue, then attempt taking a look at your burner if it is still functioning. Examine each of your burner to be sure the issue isn't with any of them. If any one of them is damaged, change that component and after that check whether the warm water is back on.
Verdict
Hot water heater issues are not constantly major. Much of them are because of small problems like a blown fuse or damaged heating element. Replacing the faulty components must do the trick. Nevertheless, if you are still not able to address the trouble, give a call to your local plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I have been very eager about Hot Water Heater Repair and I'm hoping you liked the new article. Sharing is nice. Helping others is fun. I value reading our article about No Hot Water — Water Heater Repair.
Book Now! Report this page